Probe Basic 4th Axis plot

More
2 years 9 months ago #291329 by anton610
Probe Basic 4th Axis plot was created by anton610
Hello,
first of all: Thanks for the great Probe Basic screen!

I'm using a 4th axis. Is it possible to plot the g-code in the preview window instead of:
 

Attachment not found



like this:
 

Attachment not found



do i have to change a few settings?

Thanks!
Best Regards Anton
 

Please Log in to join the conversation.

More
2 years 9 months ago #291440 by Aciera
Replied by Aciera on topic Probe Basic 4th Axis plot
Maybe this:
In the DISPLAY section of your ini file:

GEOMETRY = A!XYZ

forum.linuxcnc.org/38-general-linuxcnc-q...-display-axis#282166

Please Log in to join the conversation.

More
2 years 9 months ago #291443 by anton610
Replied by anton610 on topic Probe Basic 4th Axis plot
Many thanks!
I'll try

Please Log in to join the conversation.

More
2 years 9 months ago #291448 by anton610
Replied by anton610 on topic Probe Basic 4th Axis plot
Does not work.

 

Attachment not found



Used: A!XYZ

Please Log in to join the conversation.

More
2 years 9 months ago #291454 by Aciera
Replied by Aciera on topic Probe Basic 4th Axis plot
Can you post the gcode for that?

Please Log in to join the conversation.

More
2 years 9 months ago #291472 by anton610
Replied by anton610 on topic Probe Basic 4th Axis plot
Hello, thanks for your reply, here is the gcode:
 

Attachment not found

Please Log in to join the conversation.

More
2 years 9 months ago #291497 by Aciera
Replied by Aciera on topic Probe Basic 4th Axis plot
You need to be on version 2.9.x for this:

 

Attachment not found



However, it may not be worth the effort as the feature is rather picky regarding the work offsets and the offset values are treated as values in inches even on a metric setup.

Please Log in to join the conversation.

More
2 years 9 months ago #291534 by anton610
Replied by anton610 on topic Probe Basic 4th Axis plot
Many thanks!!
Looks good!
I'll try.
First I'll do an update.

Best regards
Anton
 

Please Log in to join the conversation.

More
2 years 8 months ago #293070 by anton610
Replied by anton610 on topic Probe Basic 4th Axis plot
Hello,
I'm on 2.9.2
but still no 4th axis plot.
Do i have to change anything else?
Thanks!

Please Log in to join the conversation.

More
2 years 8 months ago #293073 by Aciera
Replied by Aciera on topic Probe Basic 4th Axis plot
Have you changed the 'GEOMETRY' string in the [DISPLAY] section of your ini file?

Please Log in to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum