It appears QtDesigner is trying to load the QtPyVCP widgets using a python vers

Hello, I have a small questionWhen I execute the editvcp vcp command, an error is displayed:

ERROR: It appears QtDesigner is trying to load the QtPyVCP widgets
using a python version greater than 2.7, this is not supported.
Make sure that you have the correct version of the libpyqt5.so
file in /usr/lib/x86_64-linux-gnu/qt5/plugins/designer/, see the
Installation Trouble Shooting section of the QtPyVCP Documents for more info.
May I ask how to solve this problem？

Thank you！
 

To run with Python3 it seems you might need to run the dev version of PyQTVCP.
www.qtpyvcp.com/install/index.html

Seems like you have not installed the latest version of qtpyvcp that is required with later versions of linuxcnc/debian

looks like you are trying to run the latest version of qtpytvcp on a older python2 linuxcnc install, they are not compatible.  you need to be on linuxcnc 2.9 or greater.