Problem at the first start

 

Hi. Have a problem at the first start. Here is the report file. Hope that you can help me. 

I would change the 5V power supply powering the Mesa 7i76E board, find a really good one.

The actual error is this

/home/cnc/linuxcnc/configs/ProbeBasic/custom_postgui.hal:6: Pin 'halui.axis.z.minus' was already linked to signal 'jog-z-neg'

Which is a hal error

Also you have a watchdog bite which means a real time issue on the host PC that needs to be resolved