probe basic problem with manual tool change and 3d touch probe

Hello. I'm using probe basic on a parallel port milling machine.
On the one hand I have a problem with changing tools. I use the buttons on the interface but they don't do anything. If I enter the commands via MDI they change correctly.

I also have a problem with the 3D touch probe, basically it doesn't do anything when I try to calibrate it or do anything. In probe basic it shows true and false when I activate it by hand.

I'm attaching my configuration files in case it's of any use.

I think you may be missing the subroutines folder from your machine's config directory. Many UI buttons are linked to such subroutines.

The subroutines folder is in place, but your message made me think that possibly the path in the ini file contains some error.

After checking, I saw that I missed 2 errors in the file path. Now it works fine.

Let's see what the next problem is...

Thank you.