M6 remap with tool_touch_off.ngc causing gcode parser to fail

[code][qtpyvcp.plugins.gcode_properties][DEBUG] P value out of range with G10 L1 (gcode_properties.py:681) https://github.com/kcjengr/probe_basic/blob/main/configs/probe_basic/subroutines/tool_touch_off.ngc#L93 https://github.com/kcjengr/qtpyvcp/blob/main/src/qtpyvcp/plugins/gcode_properties.py#L677 from the tests I did, the issue is with having parameter #5400 there So something is unable to translate parameter number into actual parameter and hence throwing error code with P value out of range with G10 L1 Question is, if I did something wrong - like placing tool_touch_off.ngc all into M6 remap call or is there a bug with interpreting parameter number in call: [code][code]result, seq = gcode.parse(self.loaded_file, self.canon, unitcode, initcode)

O<m6remap> sub ;(debug, change: current_tool=#<_current_tool>) ;(debug, change: selected_tool=#<_selected_tool>) ;o100 if [EXISTS[#<_ini[tool_change]xpos>]] ; (debug, [tool_change]xpos exists: #<_ini[tool_change]xpos>) ;o100 else ; (debug, [tool_change]xpos does not exist) ;o100 endif ;o110 if [EXISTS[#<_ini[tool_change]ypos>]] ; (debug, [tool_change]ypos exists: #<_ini[tool_change]ypos>) ;o110 else ; (debug, [tool_change]ypos does not exist) ;o110 endif M73 #<tmp_current_tool> = #<_current_tool> #<tmp_selected_tool> = #<_selected_tool> #<init_x> = #<_x> #<init_y> = #<_y> #<init_z> = #<_z> (only do toolchange if the current tool is different from selected tool) o100 if [#<tmp_current_tool> NE #<tmp_selected_tool>] (go to tool change position defined in ini, via safe Z0) G90 G0 G53 Z#5163 G0 G53 X#<_ini[tool_change]xpos> Y#<_ini[tool_change]ypos> o100 endif M6 (use built in M6 behavior) (tool touchoff after M6 tool change) o110 if [#<tmp_current_tool> NE #<tmp_selected_tool>] o<tool_touch_off> call o110 endif (go to initial XY position via safe Z0 then go initial Z0 position) G90 G0 G53 Z#5163 G0 X#<init_x> Y#<init_y> O<m6remap> endsub [1] m2

#<new_tool_length_offset> = [ABS[#<spindle_zero_height> + #5063 - #<offset_z>]] (debug, Current Tool Number : #5400) G10 L1 P #5400 Z [#<new_tool_length_offset>] (5400 = tool number)

o100 if [[#<_task> EQ 1] .... o100 end if