Probe_Basic Bugs?

Lcvette
Offline
Platinum Member

1 year 10 months ago #316567 by Lcvette

Replied by Lcvette on topic Probe_Basic Bugs?

that is a linuxcnc error message being reported. that means your homing sequence may be incorrect or your homing method not correctly specified in the ini. see the docs of the home section for options. if the buttons are not synching up with the axis there is something missing. you will need to have a another look.

Please Log in to join the conversation.

CNC_ANDI
Topic Author
Offline
Elite Member

1 year 10 months ago #316717 by CNC_ANDI

Replied by CNC_ANDI on topic Probe_Basic Bugs?

yes but why? when i try ref all... it works fine...
i think probe basic ref y do only ref my y1 axis and not my y2...
i have 2 homing sensors for y

Please Log in to join the conversation.

tommylight
Away
Administrator

1 year 10 months ago #316720 by tommylight

Replied by tommylight on topic Probe_Basic Bugs?

Do you have
home_sequence = -2
for both Y joints set in the ini file?
Or -1 or -3....

Please Log in to join the conversation.

CNC_ANDI
Topic Author
Offline
Elite Member

1 year 10 months ago #316731 by CNC_ANDI

Replied by CNC_ANDI on topic Probe_Basic Bugs?

yes.

Please Log in to join the conversation.

Lcvette
Offline
Platinum Member

1 year 10 months ago #316771 by Lcvette

Replied by Lcvette on topic Probe_Basic Bugs?

Perhaps that action button could be replaced with a mdi button and add in the mdi code for homing both y's?

I'm not familiar enough with dual drive axis too know how the homing would need to be called for that scenario though.

Please Log in to join the conversation.

CNC_ANDI
Topic Author
Offline
Elite Member

1 year 10 months ago #316873 by CNC_ANDI

Replied by CNC_ANDI on topic Probe_Basic Bugs?

I currently have Joint 0 on the X axis Joint 1 and Joint 2 in the Y axis joint 3 on the Z Axis Joint 4 on the B axis in the ini

Joint 1 as Homing 1 and Joint 2 as Homing -1

Please Log in to join the conversation.

Lcvette
Offline
Platinum Member

1 year 10 months ago #316890 by Lcvette

Replied by Lcvette on topic Probe_Basic Bugs?

have you tried making Joint 1 and joint 2 both -1?

Attachment not found

Please Log in to join the conversation.

CNC_ANDI
Topic Author
Offline
Elite Member

1 year 10 months ago #316913 by CNC_ANDI

Replied by CNC_ANDI on topic Probe_Basic Bugs?

yes sorry wrong information from me
joint 1 and joint 2 is -1

Please Log in to join the conversation.

Lcvette
Offline
Platinum Member

1 year 10 months ago #316926 by Lcvette

Replied by Lcvette on topic Probe_Basic Bugs?

try the following:
[KINS]
JOINTS = 4
KINEMATICS = trivkins coordinates=XYYZ

[TRAJ]
COORDINATES = XYYZ

HOME_SEQUENCE = 2 (x)
HOME_SEQUENCE = -3 (y)
HOME_SEQUENCE = -3 (y2)
HOME_SEQUENCE = 1 (Z)

Please Log in to join the conversation.

CNC_ANDI
Topic Author
Offline
Elite Member

1 year 10 months ago #317014 by CNC_ANDI

Replied by CNC_ANDI on topic Probe_Basic Bugs?

won´t work i´ve tried a new config with only 3 Axis... XYYZ won´t work too...
x is ref x
y is ref y
z is ref y

Please Log in to join the conversation.

Time to create page: 0.374 seconds