ATC carosel

More
1 year 7 months ago #324284 by Sternfox
ATC carosel was created by Sternfox
Hi guys,

Is there any documentation yet for a carosel atc? Or dose pb use the standard lcnc tool change? 

Also I have dc motors on my atc that use pwm can thesr be used or do i need steppers? 

Please Log in to join the conversation.

More
1 year 7 months ago #324304 by pommen
Replied by pommen on topic ATC carosel
Does this help?
linuxcnc.org/docs/html/man/man9/carousel.9.html

Please Log in to join the conversation.

More
1 year 7 months ago #324546 by Lcvette
Replied by Lcvette on topic ATC carosel
the probe basic atc sim has the macros setup in the config files to be used as a template, have a look at toolchange.ngc and M10 thru M26.ngc in the subroutines folder.

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum