Hi
I am currently setting up my 3D Probe. I declared the probe as T99 in the table. In addition to that, I set Variable 4012 in my *.var to 99.
Code:
4000 0.000000
4001 1.000000
4002 2.000000
4003 3.000000
4004 4.000000
4005 5.000000
4006 6.000000
4007 7.000000
4008 8.000000
4009 9.000000
4010 10.000000
4011 11.000000
4012 99.000000
4013 0.000000
4014 0.000000
However, when I command the Tool to be picked from the Toolrack, I get the message "T99 not found in carousel". All the others (I actually tested only Tool 1-7) are working. Is there something I am missing?
One additional question. After inserting the Tool manually, I am using the Angle function. It works so far and I get an angle reported. However, I assume that, when clicking "Set rotation WCO", that the rotation is saved in my WCO. However, looking at the Offsets Screen, it looks like it's still 0 (I assume that would be R?). Is this correct?
Attachment not found
Attachment not found
