Cant del Offset table and save

after probing Edge Angle the R is set and now i want  remove for a new Operation
in the Tab Offsets i can clear all or clear selected or one - save and i get this Errors 

 

is your machine 5 axis using xyzac?

Config only for XYZ

need to update your config with all parameters to set the correct columns, it is calling for a axis to be set but you have no a axis configured.

kcjengr.github.io/probe_basic/machine_config.html

please ensure your config settings are correctly set for 3 axis XYZ and offset table is correctly set for XYZR and report back if that resolves!

if you are not on the latest release of probe basic, the offsets column setup is in the custom_config.yml file, change the columns to display to XYZR then save the file and restart probe basic and retry.

Lcvette wrote:

if you are not on the latest release of probe basic, the offsets column setup is in the custom_config.yml file, change the columns to display to XYZR then save the file and restart probe basic and retry.
 

Yeehaaa, it was the custom_config.yml

Great,Großartig ,Thank You,Dankeschön !!!
Step by Step ,my little Smurf come to become ready

Latency  - best i can get from this Thing called Gurke
Motion - ready
Toolsetter - works fine
Probing - Great
Spindel -
 

glad you got it sorted out!