Probe Basic Not Remembering Current Pocket Number

excellent! glad you got it sorted! now you should be future proofed too for 2.10 when it is officially released as stable!

Cześć.
Jak udało Ci się wyświetlić paski obciążenia servo w Probe Basic? Czy zrezygnowałeś z nich? Ja również używam tej karty od Dmitry'ego i jestem ciekaw, jak to rozwiązałeś.

I am still working on the servo load bars. In Dmitry's axis config for his VTC20, he has net trq5 nyx.0.servo-05.trq-fb => pyvcp.trq5 in nyx-6-pgui.hal (servo 05 is spindle in our VTC setups) so I was going to try to work with that. I just haven't tracked down nyx.0.servo-05.trq-fb yet to see if its a preconfigured input or if it has to be created.

I was able to get the spindle torque figured out. This is how I did it:

loadrt scale names=spindle_load_scale,spindle_rpm_scale
setp spindle_load_scale.gain 10
setp spindle_load_scale.offset 0
net spindle-torque nyx.0.servo-05.trq-fb => spindle_load_scale.in
net spindle-load spindle_load_scale.out => qtpyvcp.spindle-load-indicator.in-f
setp qtpyvcp.spindle-load-indicator.max-val 150
setp qtpyvcp.spindle-load-indicator.min-val 0