probe_basic nearly working but: failed to set register P0x000e to 0x0014

Hello all,

I have an ethercat setup with working axis configs and I'm trying to fire up probe basic for the first time. Everything is up to date and I've made the changes for the latest release in the ini file as well as added the new folders and files. There is some messiness in the .ini file trying to get this sorted, but I can't find anything off.

My machine will be manual tool change, no ATC for me yet, and I'm not sure I've got that right in my HAL file, especially with how it interacts with the toolchange section in probe_basic_postgui.hal. Perhaps it is this?

My error says: failed to set register P0x000e to 0x0014     and I don't know where to look to fix this issue. Can someone send me in the right direction?

 

Probably from the vfd module github.com/gitcoffey/l510_vfd/blob/c4e57...bd16/l510_vfd.c#L206
 

Hey, thanks for that. That did send me in the right direction.  It was a comms problem over TTL to the VFD, now fixed. I see I need to check the HAL files themselves for error message outputs. I keep thinking it is something internal to linuxcnc. I am a seasoned noob, but a noob nonetheless. 

I appreciate the help!