- Posts: 574
- Thank you received: 0
Sample Qtvcp Screens
5 years 1 month ago #221543
by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
For woodpecker(1920x1150).
Please Log in to join the conversation.
5 years 1 month ago #221551
by persei8
Replied by persei8 on topic Sample Qtvcp Screens
That particular combobox is populated with the contents of the stylesheet editor combobox. Qtvcp scans the config and shared folders for .qss files and populates the combbox with whatever it finds. I put it there as a convenient way to quickly change styles. To see how the handler populates that combobox, look for the section that starts with "# populate stylesheet combobox"
Please Log in to join the conversation.
5 years 1 month ago #221571
by billykid
Replied by billykid on topic Sample Qtvcp Screens
I did not understand if the settings of qtdragon not hd are valid for the probe routine except for the analog signals.
Thank you
Mauro
Thank you
Mauro
Please Log in to join the conversation.
5 years 1 month ago #221628
by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
The qtdragon1600x960 interface . I suggest those who wish to test. Reviews are welcome. For Linuxcnc 2.8.2. Downloads:
files.dp.ua/ru/WSHxVe
Please Log in to join the conversation.
5 years 1 month ago #221633
by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
The woodpecker1920x1020 interface . I suggest those who wish to test. Reviews are welcome. For Linuxcnc 2.8.2. Downloads:https://files.dp.ua/ru/wGyKCm
Please Log in to join the conversation.
5 years 1 month ago #221653
by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
The qtdragon1920x1020 interface . I suggest those who wish to test. Reviews are welcome. For Linuxcnc 2.8.2. Downloads:https://files.dp.ua/ru/Gk86
Please Log in to join the conversation.
5 years 1 month ago #221675
by cmorley
Replied by cmorley on topic Sample Qtvcp Screens
One critique comes to mind.
I notice you have flood and mist coolant buttons and LEDs in two places.
I think you should work hard to have controls and status in one place as much as possible.
Otherwise the screen gets to looks a bit 'busy' (cluttered)
IMHO I'd work on taking things away until usability issues come up.
ie I would remove the calender, if only to put a low-key image there.
I like woodpeckers layout and full view of all tabs. Keep up the work!
Chris
I notice you have flood and mist coolant buttons and LEDs in two places.
I think you should work hard to have controls and status in one place as much as possible.
Otherwise the screen gets to looks a bit 'busy' (cluttered)
IMHO I'd work on taking things away until usability issues come up.
ie I would remove the calender, if only to put a low-key image there.
I like woodpeckers layout and full view of all tabs. Keep up the work!
Chris
Please Log in to join the conversation.
5 years 1 month ago #221690
by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
Thank you for your attention and tips. Ui file for woodpecker (1580x960), woodpecker (1920x1020) with your comments in mind.
Please Log in to join the conversation.
5 years 4 weeks ago #222071
by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
Changes for woodpecker (1280s 1024). For linuxcnc 2.8.2.
Please Log in to join the conversation.
Time to create page: 0.112 seconds
