Qtvcp is missing on linuxcnc environment

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 8 months ago #157119 by BeagleBrainz
Replied by BeagleBrainz on topic Qtvcp is missing on linuxcnc environment
Isn't that a dep of linuxcnc-uspace ?

Just checked and it is.

Please Log in to join the conversation.

More
6 years 8 months ago #157135 by prochj51
Replied by prochj51 on topic Qtvcp is missing on linuxcnc environment
Yes sorry typo,

python-xlib

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 8 months ago #157137 by BeagleBrainz
Replied by BeagleBrainz on topic Qtvcp is missing on linuxcnc environment
Did any of part linuxcnc run prior to installing python-xlib ?

Please Log in to join the conversation.

More
6 years 8 months ago #157144 by prochj51
Replied by prochj51 on topic Qtvcp is missing on linuxcnc environment
Yes,
every part ran without any issues.
Except the widget loading.

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 8 months ago #157153 by BeagleBrainz
Replied by BeagleBrainz on topic Qtvcp is missing on linuxcnc environment
No I mean trying a Linuxcnc config as python-xlib is a dep of linuxcnc, I'm not talking about designer.

Please Log in to join the conversation.

More
6 years 8 months ago #157199 by cmorley
Replied by cmorley on topic Qtvcp is missing on linuxcnc environment
a linuxcnc screen will only fail without python-xlib if it uses that library, which pretty much should require embedding.
Designer uses all widgets so it's requirements are higher.

Chris

Please Log in to join the conversation.

Time to create page: 2.275 seconds
Powered by Kunena Forum