GCode viewer line numbers

persei8
Topic Author
Offline
Platinum Member

6 years 7 months ago #160064 by persei8

GCode viewer line numbers was created by persei8

The current gcode_editor widget only allows a line number margin width of 5 characters. 2d carving files often have more than 100K lines. What's the best way to change this to 6 characters? Thanks.

Please Log in to join the conversation.

bbsr_5a
Offline
Platinum Member

6 years 7 months ago #160066 by bbsr_5a

Replied by bbsr_5a on topic GCode viewer line numbers

best way woudt be reduce the lines of g-code by increasing the linewidth
or even a greater Tool

this needs to be done as of a programmer in the QTWidget

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 7 months ago #160067 by cmorley

Replied by cmorley on topic GCode viewer line numbers

I just pushed work - it should be one character wider now and if you want to change it after that then use something like this:

self.w.GCODEEDITOR_WIDGET_NAME.set_margin_width(

This is new so you need to pull it in before trying it.

Chris

Please Log in to join the conversation.

phillc54
Offline
Platinum Member

6 years 7 months ago #160124 by phillc54

Replied by phillc54 on topic GCode viewer line numbers

cmorley wrote: I just pushed work - it should be one character wider now and if you want to change it after that then use something like this:
self.w.GCODEEDITOR_WIDGET_NAME.set_margin_width(
This is new so you need to pull it in before trying it.

I don't see this yet.

Edit: I see it just got pushed to master with my last update.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 7 months ago #160127 by cmorley

Replied by cmorley on topic GCode viewer line numbers

Thats twice now where I merged and then didn't push --getting older faster...

Please Log in to join the conversation.

phillc54
Offline
Platinum Member

6 years 7 months ago #160133 by phillc54

Replied by phillc54 on topic GCode viewer line numbers

cmorley wrote: Thats twice now where I merged and then didn't push --getting older faster...

I know the feeling well...

Quick question, is it possible to set the color and background in the stylesheeteditor. I have tried a few things but didn't get anywhere.
I only need it for when I am trying different things and do something wrong they end up the same color.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 7 months ago #160136 by cmorley

Replied by cmorley on topic GCode viewer line numbers

I haven't tried stylesheets on gcode editor - i'll see what i can findout. My guess is it's controlled by the editor because of text coloring for different code.

Please Log in to join the conversation.

phillc54
Offline
Platinum Member

6 years 7 months ago #160137 by phillc54

Replied by phillc54 on topic GCode viewer line numbers

Not the GCode Editor (although that would be nice as well) the StyleSheetEditor itself.
Sometimes I change something in the StyleSheetEditor and end up with the same color and background...

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 7 months ago #160139 by cmorley

Replied by cmorley on topic GCode viewer line numbers

ok try this:

Code:

StyleSheetEditor, QTextEdit {
    background-color: lightblue;
	color:green;
}

Please Log in to join the conversation.

phillc54
Offline
Platinum Member

6 years 7 months ago #160142 by phillc54

Replied by phillc54 on topic GCode viewer line numbers

Thanks Chris, the QTextEdit without the StyleSheetEditor works well enough to keep me out of trouble.

Please Log in to join the conversation.

Time to create page: 0.095 seconds