QtDragon on Debian Buster, some issues

More
6 years 1 month ago #181089 by cmorley
Replied by cmorley on topic QtDragon on Debian Buster, some issues
can you post both configs?

Please Log in to join the conversation.

More
6 years 1 month ago #181179 by keyboard
Replied by keyboard on topic QtDragon on Debian Buster, some issues
Hi Chris,
Here the two configs. Hope you can find something, as I've run outta ideas.:(

Please Log in to join the conversation.

More
6 years 1 month ago #181181 by cmorley
Replied by cmorley on topic QtDragon on Debian Buster, some issues
ok here is a stab in the dark... I see a difference in the HAL file for qtDragon
Code:
loadrt [HOSTMOT2](DRIVER) board_ip=[HOSTMOT2](IPADDRESS) config="num_encoders=[HOSTMOT2](ENCODERS)num_stepgens=[HOSTMOT2](STEPGENS)sserial_port_0=[HOSTMOT2](SSERIAL_PORT)"

There is no space between (STEPGENS) and sserial_port_0

Please Log in to join the conversation.

More
6 years 1 month ago #181198 by keyboard
Replied by keyboard on topic QtDragon on Debian Buster, some issues
Thanks Chris,
That space did it.

Please Log in to join the conversation.

More
6 years 1 month ago #181203 by cmorley
Replied by cmorley on topic QtDragon on Debian Buster, some issues
excellent

Please Log in to join the conversation.

More
6 years 1 month ago #181205 by keyboard
Replied by keyboard on topic QtDragon on Debian Buster, some issues
How do I update to get the changes?
I tried sudo apt-get update and upgrade , but didn't see any change in the calibration button function. (post # 171670)

Thanks.

Please Log in to join the conversation.

More
6 years 1 month ago #181206 by cmorley
Replied by cmorley on topic QtDragon on Debian Buster, some issues
can you post a link to the post you are talking of? I can't seem to search post numbers.

if you got linuxcnc from buildbot then the update manager should pull in the newest.

Please Log in to join the conversation.

More
6 years 1 month ago #181207 by cmorley
Replied by cmorley on topic QtDragon on Debian Buster, some issues
oh ok I see the post now.
how did you get linuxcnc?

Please Log in to join the conversation.

More
6 years 1 month ago #181292 by keyboard
Replied by keyboard on topic QtDragon on Debian Buster, some issues
Thanks to tommylights quick and easy install procedure, I have LINUXCNC - 2.9.0-pre0-2118-g0c8cdaaf1 running on Debian Buster.

Please Log in to join the conversation.

More
6 years 1 month ago #181306 by cmorley
Replied by cmorley on topic QtDragon on Debian Buster, some issues
So looks like that would be buildbot binary.
sudo apt-get update
sudo apt-get upgrade linuxcnc-uspace

should do it

Please Log in to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum