Probing in Qtdragon

Hi,

I edited sim_qtdragon according to the settings for my machine. Everything seems to be working fine but if chose probe tab, everything is grayed out. What to add to the ini or hal to make the probe functions available? Alternatively, if someone can share functional configuration with the probe.

Thank you.

Marek.

Can you run linuxcnc from a terminal and see if any pertinent info is shown.

If you have homes the machine and still are blocked, I would think it cant find the macro library which is defined in the INI.

Ok, thank you. The machine is homed. But folder with macros is not include sim_qtdragon. I'll try to work it out tomorrow.

Should be in your linuxcnc/nc_files folder maybe under probe or maco/probe