Gcode Editor Find Previous

phillc54
Topic Author
Offline
Platinum Member

5 years 10 months ago #192093 by phillc54

File Manager Find Previous was created by phillc54

The find previous button keeps giving the following error:

Code:

Traceback (most recent call last):
  File "/home/phill/git/linuxcnc-dev/lib/python/qtvcp/widgets/gcode_editor.py", line 768, in nextCall
    next(self)
TypeError: GcodeEditor object is not an iterator

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

5 years 10 months ago #192095 by cmorley

Replied by cmorley on topic File Manager Find Previous

do you mean gcode editor search function?

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

5 years 10 months ago #192096 by phillc54

Replied by phillc54 on topic File Manager Find Previous

Oops. :blush:

Yep, that's the one.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

5 years 10 months ago #192098 by cmorley

Replied by cmorley on topic File Manager Find Previous

i'll look into it (haven't tested that in a long while)

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

5 years 10 months ago #193274 by phillc54

Replied by phillc54 on topic Gcode Editor Find Previous

I changed the title to a more correct one but have another question.

Some time back it was possible to hide the gcode lexer button and the python lexer button but it has changed and I cannot work out how to do it any more. Is it possible to allow this to happen again?

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

5 years 10 months ago #193280 by cmorley

Replied by cmorley on topic Gcode Editor Find Previous

Sorry I forgot about the broken search function - fixed now.

Added some code to help.
If there is a convenience function needed to set a common set of controls visible (ie setting up modes of operations) then let me know
But here are the raw functions samples:

Code:

        w=self.w.gcodewidget
        w.toolBar.hide() # hides everything
        w.pythonLexerAction.setVisible(False)
        w.gCodeLexerAction.setVisible(False)
        w.openAction.setVisible(False)
        w.newAction.setVisible(False)
        w.saveAction.setVisible(False)
        w.exitAction.setVisible(False)
        w.label.setText('<b>Edit mode title label</b>')

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

5 years 10 months ago #193284 by phillc54

Replied by phillc54 on topic Gcode Editor Find Previous

Thanks Chris, I can close my PR then, although there are some status tip changes you could get from it.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

5 years 10 months ago #193287 by cmorley

Replied by cmorley on topic Gcode Editor Find Previous

Sorry I didn't see that either - I'll incorporate your work too.

Chris

Please Log in to join the conversation.

Time to create page: 0.102 seconds