Seems like a buffer size limit on toolpath highlighting

More
5 years 7 months ago #200802 by hottabich
Replied by hottabich on topic Seems like a buffer size limit on toolpath highlighting
What does a large file mean? Here is a 35Mb file, and if the buffer is not cleared, how much RAM do you need? Note how much is already taken.

Please Log in to join the conversation.

More
5 years 7 months ago #200818 by turbostew
Replied by turbostew on topic Seems like a buffer size limit on toolpath highlighting
Sorry, misread your post Jim. You did say that was normal. I don't like "normal".......

Please Log in to join the conversation.

More
5 years 7 months ago #200860 by turbostew
Replied by turbostew on topic Seems like a buffer size limit on toolpath highlighting
Only 6000 lines on the file sent to Chris....

Please Log in to join the conversation.

More
5 years 7 months ago #201659 by turbostew
Replied by turbostew on topic Seems like a buffer size limit on toolpath highlighting
Did anyone ever find out how to increase buffer size?

Please Log in to join the conversation.

More
5 years 7 months ago #201839 by turbostew
Replied by turbostew on topic Seems like a buffer size limit on toolpath highlighting
Bump...

Please Log in to join the conversation.

More
5 years 7 months ago #201865 by cmorley
Replied by cmorley on topic Seems like a buffer size limit on toolpath highlighting
I doubt this is a buffer size problem. The only difference between the colors is a color setting. If it was a too small memory buffer, I would expect the drawing to be corupt or disappear.
i would make a linuxcnc github bug report so it doesn't get forgotten.

Please Log in to join the conversation.

More
3 years 10 months ago #258512 by turbostew
Replied by turbostew on topic Seems like a buffer size limit on toolpath highlighting
Reviving my old thread.... I upgraded to latest master a few weeks ago and this problem is back. Well, at least I believe it was fixed before.... Any idea how to fix this?

Please Log in to join the conversation.

More
3 years 10 months ago #258642 by andypugh
Replied by andypugh on topic Seems like a buffer size limit on toolpath highlighting
I don't recall seeing any commit that sounded to be related to this, but there are dozens a week so might have forgotten or not noticed.

Please Log in to join the conversation.

More
3 years 10 months ago #258773 by snowgoer540
Replied by snowgoer540 on topic Seems like a buffer size limit on toolpath highlighting
To my knowledge, this has been this way for ... ?  I know it's the same way in pathpilot, which uses 2.8.  

I think I see where this could be changed, but I need a big g-code file to play with to test.  

Anyone have anything readily available?

Please Log in to join the conversation.

More
3 years 10 months ago #258780 by tommylight
Replied by tommylight on topic Seems like a buffer size limit on toolpath highlighting

Anyone have anything readily available?[/i]
First post, right click and choose save as:
forum.linuxcnc.org/38-general-linuxcnc-q...large-ngc-file-crash

Please Log in to join the conversation.

Time to create page: 0.162 seconds
Powered by Kunena Forum