qtDragon Jog buttons

Hello, I've been working on a machine using the qtdragon interface. Nicely done I must say to all those involved but I'm not sure why the jog button graphics appear blank or how to change.

Debian 10
Linuxcnc 2.9

thanks

Is this an installed or compiled version ?

Also are you using custom modified files or just the standard one.

The config was created with the Pncconf Wizard. No file mods other than the ini and hal files.

thanks

how did you get linuxcnc?

I just created a basic qtdragon sim config using the Pncconf wizard with no post file mods and the result is the same.
thanks

I'm asking how you got _Linuxcnc_ not the configuration.

Buildbot? ISO ? compiled from source?

used synaptic package manager. set the repository to buildbot.linuxcnc.org/ - buster - master-rtpreempt

ok thank you.
That's an installed version.
Installed versions put the file in different places and adds some restrictions to those files.
I use a compiled version for development so some times miss those problems.

I have noticed an error message in some posted debug messages that indicate there is a problem with installed version creating a needed file.
I'll be working on this in about a week or so.
Thank you for the report.

+1 on this

buildbot master originally installed from iso

the background graphic and button images are all missing

played around with F12 and selected other themes but no dice, expect it's looking for files in the wrong places

(I have QtPlasmaC running fine so presume it's not QT dependencies)