QtDragon DRO decimal places

I wonder if this is common enough to add as a settings option?

Well IMHO, for a router 10th of thousandths is just annoying to see, but for a mill tenths (of a thousandths) is a must. Maybe a ultra-precision mini mill might go out one more place.

It has been a 1.5 years since last post, seems things have changed. How do I change (preferred method) QtDragon DRO precision in the latest master?

What version of linuxcnc are you using?

In master this should work in your stylesheet file. you can edit it from the built on editor in qtdragon. press f12 to launch it.
change the template to what you like (as before):

DROLabel {
font: 25pt "Lato Heavy";
qproperty-imperial_template: '%9.4f';
qproperty-metric_template: '%10.3f';
qproperty-angular_template: '%11.2f';
}

For completeness here is hoe to set origin/tool offset view with stylesheets too.

ToolOffsetView {
font: 20pt "Lato Heavy";
qproperty-imperial_template: '%9.1f';
qproperty-metric_template: '%10.1f';

}

OriginOffsetView {
font: 12pt "Lato Heavy";
qproperty-imperial_template: '%9.1f';
qproperty-metric_template: '%10.1f';
}

Thanks!

One more thing, I want to change my feedrate DRO to add a decimal place. Whole numbers in inches is too granular....

I pushed the fix to this to 2.9 but if you don't want to update this should do the same:

 

I mean this readout....

status_act_feedrate{
qproperty-textTemplate: '%.1f';
}

Thanks! Took me a while but by deduction I figured out the complete code is:

StatusLabel#status_act_feedrate{
qproperty-textTemplate: '%.1f';
}