QtDragon & probe routines (crashing)

Hi all

I am starting to play around with the probe screens in QtDragon & I am using the latest development version.
Every time I try to do the center probe it crashes and gives a python error.

I have posted the error in the hope that someone understands what this means.
I have also posted a screen shot of what I was doing at the time.

Thanks
 

I pushed a (hopeful) fix for this. I don't have a probe handy to truly test properly, so there may be others.
Thanks for reporting.

Hi there

I have done an update, but it appears the same error is still occurring. I have again attached screen shots & a copy of the error.
Please let me know if there is anything further I can do.

Thanks
 

Chris, I don't think you ever pushed the updates I gave you a few months ago. However, these errors seem to be related to python3. 

Just to let you know that I have tried it with the latest update (pre0.4513) & that seems to be working.

Thanks
 

Jim are you talking in Febuary?
I thought i did (I am sorry if I did not!)

Though I just diffed and probe_routines looks different (but most is white space etc.)
Is probe_routines the file not updated?
Probe_subprog looks the same

Thanks
Chris

frayja2002 wrote:

Just to let you know that I have tried it with the latest update (pre0.4513) & that seems to be working.

Thanks

Good thanks for update.
Looks like I might have missed some updates Jim worked on....stay tuned.
Chris

It does appear that probe_subprog is the same. But probe_routines is missing the probe_down_fast routine. This gets a working Z height before probing corners and stuff, otherwise the user has to do it manually. I've sent you the file in case you no longer have it.

Ok I pushed your work Jim.
I'm sorry I didn't get it all the first time.

Chris