QtDragon axis calibration

More
4 years 11 months ago #225234 by myval
QtDragon axis calibration was created by myval
Here is another qtdragon question.
How do I run axis PID calibration in qtdragon? I could run it in axis but I struggle to find it in qt dragon

Please Log in to join the conversation.

More
4 years 11 months ago #225527 by cmorley
Replied by cmorley on topic QtDragon axis calibration
Its not available in qtdragon.
I'll see about changing that.

Please Log in to join the conversation.

More
4 years 11 months ago #225531 by cmorley
Replied by cmorley on topic QtDragon axis calibration
What version of linuxcnc are you using?

Please Log in to join the conversation.

More
4 years 11 months ago #225644 by myval
Replied by myval on topic QtDragon axis calibration
Hi,
I am running the latest 2.9

Please Log in to join the conversation.

More
4 years 11 months ago #226054 by cmorley
Replied by cmorley on topic QtDragon axis calibration
Ok if you update - it should be there now.

Please Log in to join the conversation.

More
4 years 11 months ago #226077 by myval
Replied by myval on topic QtDragon axis calibration
wowzer that was super quick, thanks,
Will give it a go and report back.

Please Log in to join the conversation.

Time to create page: 0.084 seconds
Powered by Kunena Forum