On the wrong configuration of five axis motion

Hello, I want to use five axis motion now. I use the five axis configuration of linuxcnc to configure my program. I only modified the called Python program, but after the modification, its track is not displayed in my program, but in another program interface. I don't know why. I hope someone can help me. This is my INI file. I refer to the / configurations / SIM / axis / vismach / 5axis / table rotary tiling / xyzac-trt.ini file

I'm sorry I don't understand.

你好，我的ini配置文件使用/configurations/SIM/axis/vismach/5axis/table rotation tiling/xyzac-trt.ini。参考这里的配置文件，但是当我使用这个INI文件打开我的程序时，会出现两个窗口。我的程序窗口显示轨迹的地方，没有轨迹，也没有相应轴的坐标。但它在另一个窗口中有一个轨道显示。我不知道如何修改 INI 文件。我怀疑我选择的内容有问题，但我不知道如何修改

Ok. does homing make any difference?

Home is no different. It can still be home, but the value and track of the axis are not displayed in the track interface, but the data position of the axis is displayed in the drolabel. It should be the INI file, but I don't know much about it. Do you have a 5-axis ini configuration example for me to refer to? Thank you

Hello, after I used home all, I found that the jog program I wrote in Python seems to be useless, but it can still be used with the actionbutton button in qtvcp, and there are tracks in the track interface. Can you help me see what's wrong with the jog motion Python code I wrote? thank you 

homed jogging is different from unhomed jogging.
I would suggest you use the ACTION library's jog or do_jog for jogging.
Or look at that code for guidance.

There is a 9 axis sample called qtdefault_9_axis

Yes, I now know that only after all axes are home can I run my jog motion correctly. Before I had all my homes, I felt that my jog movement was very abnormal. Now I use ptvcp action.