qtDragon, gantry (2 joints) error

More
4 years 11 months ago #227089 by ikkuh
qtDragon, gantry (2 joints) error was created by ikkuh
I have a gantry type cnc, 2 joints for the Y axes. If I try to re-home the Y axis then I get the following error:
Code:
File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 598, in btn_home_clicked if self.w["dro_axis_{}".format(axis)].property('isHomed') is True: File "/usr/lib/python3/dist-packages/qtvcp/qt_makegui.py", line 353, in __getitem__ return getattr(self, item) AttributeError: 'VCPWindow' object has no attribute 'dro_axis_y2'


Attachment not found

Please Log in to join the conversation.

More
4 years 11 months ago #227135 by cmorley
Replied by cmorley on topic qtDragon, gantry (2 joints) error
I'll look into it.

Please Log in to join the conversation.

More
4 years 10 months ago #229591 by cmminear
Replied by cmminear on topic qtDragon, gantry (2 joints) error
I have 2 y axis and get the same error. I can home all with no issue. If I home just x I cant move anything but x until I home all again. Homing y or z crashes with the above error.

Please Log in to join the conversation.

More
4 years 10 months ago #229596 by cmorley
Replied by cmorley on topic qtDragon, gantry (2 joints) error
I updated the dragon code to fix this error in master branch.
Did you update lately?
Switching to a XYZY config rather then a XYYZ config would fix it too.

Please Log in to join the conversation.

More
4 years 10 months ago #229637 by cmminear
Replied by cmminear on topic qtDragon, gantry (2 joints) error
Is there an easy way to upgrade when I have the prebuilt linuxcnc image(LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO)? Or how hard is it to switch to a XYZY config?

Please Log in to join the conversation.

More
4 years 10 months ago #229697 by cmorley
Replied by cmorley on topic qtDragon, gantry (2 joints) error
I haven't back ported the fixes to 2.8 so no not so easy.

changing to XYZY requires INI and a HAL file change.


 

Please Log in to join the conversation.

Time to create page: 0.099 seconds
Powered by Kunena Forum