help to install qtdragon_hd ?

More
4 years 10 months ago #230267 by Kasper-001
help to install qtdragon_hd ? was created by Kasper-001
hello
i have being struggling to get qtdragon_hd as my gui
i just can´t figure out how to install it correctly, i have removed the the folders i have create in /usr/shares/qtvcp/sreens
 

Please Log in to join the conversation.

More
4 years 10 months ago #230297 by cmorley
Replied by cmorley on topic help to install qtdragon_hd ?
What version of linuxcnc?

Please Log in to join the conversation.

More
4 years 10 months ago #230320 by Kasper-001
Replied by Kasper-001 on topic help to install qtdragon_hd ?
linuxcnc-2.8.2-buster

Please Log in to join the conversation.

More
4 years 10 months ago #230322 by cmorley
Replied by cmorley on topic help to install qtdragon_hd ?
qtdradon_hd is not available in 2.8. back porting it would be troublesome I think.

Please Log in to join the conversation.

More
4 years 10 months ago #230323 by Kasper-001
Replied by Kasper-001 on topic help to install qtdragon_hd ?
Okay Thanks :) 

Please Log in to join the conversation.

More
4 years 10 months ago #230330 by hottabich
Replied by hottabich on topic help to install qtdragon_hd ?

Okay Thanks :) 

 
zfile.in.ua/ru/DC2kceWA You can test it as an option. Place the file in the linuxcnc / configs folder.

Please Log in to join the conversation.

More
4 years 10 months ago #230332 by Kasper-001
Replied by Kasper-001 on topic help to install qtdragon_hd ?
it came with this  

Please Log in to join the conversation.

More
4 years 10 months ago #230340 by hottabich
Replied by hottabich on topic help to install qtdragon_hd ?

it came with this  
 
forum.linuxcnc.org/qtvcp/44595-woodpecke...rtrait-mode-problems   I think this will help you. Are you first time in linuxcnc?

Please Log in to join the conversation.

Time to create page: 0.086 seconds
Powered by Kunena Forum