Great to have this working now. When there is no pressure from the spindle water cooling pump the machine will turn off when it was on, then a blocking dialog box will show on the screen. Nothing works until the error is fixed.
By turning the machine off the spindle will stop too.
(did I ever mention the editor of the forum software totally sucks?)
imgur.com/I3sGcmR
qt.ini
[DISPLAY]
MESSAGE_BOLDTEXT = Water pomp staat uit
MESSAGE_TEXT = De waterkoeling pomp van de spindle staat uit of werkt niet meer.
MESSAGE_DETAILS = Na oplossen van de fout verdwijnt deze boodschap vanzelf
MESSAGE_TYPE = nonedialog
MESSAGE_PINNAME = no-coolant
MESSAGE_ICON = CRITICAL
Code:
loadrt or2 names=tool_probe,vacuumOr2,machineOnOr2
addf tool_probe servo-thread
addf vacuumOr2 servo-thread
addf machineOnOr2 servo-thread
net btn-pwr <= input.0.btn-top2 => machineOnOr2.in0
net coolant-pump <= [HMOT](CARD0).7i84.0.0.input-00 => machineOnOr2.in1
net pwr-btn toggle2Power.in machineOnOr2.out qtdragon.no-coolant
net tog-on toggle2Power.is-on <= halui.machine.is-on => [HMOT](CARD0).gpio.037.out
net pwr-on halui.machine.on <= toggle2Power.on
net pwr-off halui.machine.off <= toggle2Power.off
