[QtDragon] Plasma interface?

More
4 years 8 months ago #233847 by RomeReactor
Hi all. Is there any work being done on a QtDragon plasma interface? And if so, where would I be able to follow it?

Thanks in advance.

Please Log in to join the conversation.

More
4 years 8 months ago #233849 by tommylight
Not that i am aware of, there is QtPlasmaC and i think something is being done by Joco for MonoKrom GUI that is QtPyVCP:
www.forum.linuxcnc.org/qtpyvcp/40082-mon...mac-and-mill?start=0

Please Log in to join the conversation.

More
4 years 8 months ago #233850 by RomeReactor
Thank you.

Please Log in to join the conversation.

More
4 years 8 months ago #233861 by rodw
Replied by rodw on topic [QtDragon] Plasma interface?
Tommy is right. Joco has a config for QTPYVCP called monokrom
github.com/joco-nz/monokrom-vcp
Its ready for testing and I have used it. I like it a lot. A different philosophy to Plasmac but a nicer touch screen interface.

 

Please Log in to join the conversation.

More
4 years 8 months ago #234093 by hottabich
Corrected the sizes of buttons for touch screens. Maybe someone will fit.

Please Log in to join the conversation.

More
4 years 8 months ago #234226 by phillc54
You can achieve similar results with custom styles:
linuxcnc.org/docs/devel/html/plasma/qtpl...#_add_a_custom_style

The attached were done with a file in the config directory named qtplasmac_custom.qss with the following contents:
Warning: Spoiler!


Warning: Spoiler!


Warning: Spoiler!

 

Please Log in to join the conversation.

More
4 years 8 months ago #234262 by hottabich
Thank you for your attention! In the designer, I adjusted the size of the Main Window and Push Buttons. The rest is in styles. Please tell me how to change the size and appearance of Jog Buttons. Thanks!

Please Log in to join the conversation.

More
4 years 8 months ago #234310 by phillc54
Try this:
Code:
/* JOG BUTTONS ------------------*/ #jog_x_plus, #jog_x_minus, #jog_y_plus, #jog_y_minus, #jog_z_plus, #jog_z_minus {min-height: 60; min-width: 60; qproperty-iconSize: 60px}

Edit: I have added a reasonable custom stylesheet for 1680x1050 display.

Please Log in to join the conversation.

More
4 years 8 months ago #234314 by phillc54
This is a separate post because the forum editor is a POS...

I pushed a change so that it is now possible to change the size of the user buttons as well:
Code:
/* USER BUTTONS -----------------*/ /* the next line needs to be 2 x button width plus 16 */ #main_c2 { max-width: 176px} #file_edit, #mdi_show, #button_1, #button_2, #button_3, #button_4, #button_5, #button_6, #button_7, #button_8, #button_9, #button_10, #button_11, #button_12, #button_13, #button_14, #button_15, #button_16, #button_17, #button_18, #button_19, #button_20 {min-width: 80; min-height: 60}

 

Please Log in to join the conversation.

More
4 years 8 months ago #234331 by hottabich
Thank you so much for your work and help! Good luck.

Please Log in to join the conversation.

Time to create page: 0.135 seconds
Powered by Kunena Forum