[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR] Video capture error: VideoCapture()

[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR]  Video capture error: VideoCapture() takes at most 1 argument (2 given) (camview_widget.py:290)

The cam works in vlc (and used to work great in qtDragon).
This is my production machine, using the buildbot version (updated today).
 

 

The linux_info file doesn't give any pertinent info.
Can you post the output from he terminal.
On a quick look I can't see an error in the file.
Maybe you could post the camview.py file too?

[QTvcp][INFO]  postgui filename: (qtvcp:409)
note: name is 'DragonRise Inc.   Generic   USB  Joystick  '
[QTvcp][INFO]  postgui commands: None (qtvcp:421)
[QTvcp][INFO]  Preference path: /home/cnc/linuxcnc/configs/qt/qtdragon.pref (qtvcp:399)
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR]  Video capture error: VideoCapture() takes at most 1 argument (2 given) (camview_widget.py:290)


There is no camview.py

cnc@cnc-machine:~/linuxcnc/configs/qt$ locate camview.py
not found

cnc@cnc-machine:~/linuxcnc/configs/qt$ locate camview
/usr/lib/python3/dist-packages/qtvcp/plugins/camview_plugin.py
/usr/lib/python3/dist-packages/qtvcp/plugins/__pycache__/camview_plugin.cpython-37.pyc
/usr/lib/python3/dist-packages/qtvcp/widgets/camview_widget.py
/usr/lib/python3/dist-packages/qtvcp/widgets/__pycache__/camview_widget.cpython-37.pyc

 

Is this not the error?
Video capture error: VideoCapture() takes at most 1 argument (2 given) (camview_widget.py:290)

sorry. camview_widget.py

Well that file is the same as I'm using..hmmm

  Maybe there is something strange going on.... See the screenshot where the checkmarks are gone.

Yesterday I purged the install of LinuxCNC and did a fresh apt install linuxcnc-uspace on this production machine.
Debian 10.12
LinuxCNC LINUXCNC - 2.9.0-pre0-6533-g54bc57f73

ikkuh wrote:

Is this not the error?
Video capture error: VideoCapture() takes at most 1 argument (2 given) (camview_widget.py:290)

Yes it is, so check for a space or a . or whatever that might be seen as the second argument on line 290.

ikkuh wrote:

 

Attachment not found

Maybe there is something strange going on.... See the screenshot where the checkmarks are gone.Yesterday I purged the install of LinuxCNC and did a fresh apt install linuxcnc-uspace on this production machine.Debian 10.12LinuxCNC LINUXCNC - 2.9.0-pre0-6533-g54bc57f73 

 

Replace the argentinum.qss file.
 

I think we may have got these fixed or definitely moving forward on them.
Thanks for the bug reports.