I'm trying to migrate to qtdragon-hd on a working axis on Bullseye Initially set up 12 months ago.
I did an sudo apt upgrade to get the current version of Bullseye and then
upgraded 2.9 using the debs on the hidden buildbot in training... All went well and the qtdragon sims work perfect.
So this morning, I worked through the qtdragon install and finally get the GUI to open after commenting out a few custom pins I used in an axis side panel. BUt on openingit displays this error:
Code:
mill2@mill2:~/linuxcnc/configs/VMNmillQT$ linuxcnc -l
LINUXCNC - 2.9.0-pre1-683-g5585d6c36
Machine configuration directory is '/home/mill2/linuxcnc/configs/VMNmillQT'
Machine configuration file is 'VMNmillQT.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Note: Using POSIX realtime
Found file(REL): ./VMNmillQT.hal
qt.qpa.xcb: QXcbConnection: XCB error: 5 (BadAtom), sequence: 2062, resource id: 0, major code: 20 (GetProperty), minor code: 0
[QTvcp.QTVCP.WIDGETS.ORIGIN_OFFSETVIEW][ERROR] File does not exist: /home/mill2/linuxcnc/VMNmillQT/linuxcnc.var (origin_offsetview.py:301)
[QTvcp][CRITICAL] Aborted from Error Dialog
Qtvcp encountered an error. The following information may be useful in troubleshooting:
LinuxCNC Version : 2.9.0-pre1-683-g5585d6c36
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/qtvcp/widgets/origin_offsetview.py", line 383, in periodic_check
self.reload_offsets()
File "/usr/lib/python3/dist-packages/qtvcp/widgets/origin_offsetview.py", line 232, in reload_offsets
temp[STATUS.stat.g5x_index-1] = STATUS.stat.g5x_offset
TypeError: 'tuple' object does not support item assignment
(qtvcp:465)
[QTvcp.QTVCP.WIDGETS.ORIGIN_OFFSETVIEW][ERROR] File does not exist: /home/mill2/linuxcnc/VMNmillQT/linuxcnc.var (origin_offsetview.py:301)
/usr/bin/linuxcnc: line 977: 24340 Segmentation fault $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS
Shutting down and cleaning up LinuxCNC...
Running HAL shutdown script
task: 3895 cycles, min=0.000035, max=0.018058, avg=0.005082, 0 latency excursions (> 10x expected cycle time of 0.005000s)
vfdmod: close request received.
iov2: exiting
vfdmod: application closed.
Note: Using POSIX realtime
LinuxCNC terminated with an error. You can find more information in the log:
/home/mill2/linuxcnc_debug.txt
and
It seems like its failing due to a missing .var file but I have tried a few different file names to ensurethe file exists. How can I get past this road block?
