qtdragon - probing issues

Thanks Rod,

I do believe that it has the Baytrail chipset. That name sounds familiar. I will focus a bit on the hardware side to make sure (as best I can) that the USB connections are good. It may be time for me to switch to the ODroid H2 and 7i76E I have on the shelf. Right now I am using a 6i25+7i76 with the J1800.

The H2 will likely need the R8125-dkms driver installed to improve latency with the mesa network segment.

I have a H2+ on Bullseye here

I just looked up my order and mine is also an H2+. Do you run a fan on yours? I have a fan on mine but in desk testing it only comes on at a low speed if at all.

Thanks
John

no fan here.

Jim, thanks for the explanation. I admit I did not fully read it until today.
That would be really good to include in the documentation.
And, actually, maybe include the calibration work in the Versa Probe screen and code......

Chris, this is for you too.....

I just want to express my awe, intimidation and appreciation for what you all are doing in this thread in particular as well as and in every other.

You don't get a big enough audience for your brilliance.   Thank you!