Aspect Ratio question

More
3 years 4 months ago #274352 by Jalapeno56
Aspect Ratio question was created by Jalapeno56
I am running QTplasmaC 1.223.185 on Linuxcnc 2.9 with Debian 11 RT 21.
We had a power outage that messed up alot of things....
My backup errors out when trying to open, and I am unable to get QTplasmaC back into 4:3 mode.  I have gone thru pncconf to change with no luck.
Can someone tell me what file the aspect ratio is in?  I have searched everywhere I can think of.
Thanks!

Please Log in to join the conversation.

More
3 years 4 months ago #274353 by phillc54
Replied by phillc54 on topic Aspect Ratio question
In the [DISPLAY] section of the ini file you need this line:
Code:
DISPLAY = qtvcp qtplasmac_4x3

Please Log in to join the conversation.

More
3 years 4 months ago #274423 by Jalapeno56
Replied by Jalapeno56 on topic Aspect Ratio question
That's what I needed! Thank you!

Please Log in to join the conversation.

Time to create page: 0.286 seconds
Powered by Kunena Forum