QtDragon HD with Z-Comp: Tool Sensor and Touch Plate Function

Hi Mr @cmorley,
and where would I find that " handler File " ?

best regards

turn debug comments on:

DISPLAY = qtvcp -d qtdragon_hd

run linuxcnc in a terminal

there is be comments like 'Using DEFAULT handler file path:'
and the path will be shown.

@cmorley
ok, I messed with the wrong handler ggggrrrrr.

what I still don' like is the path to home.
It does a g0 x0 y0 z0
how to :
g0 z110
g0 x0 y0
g0 z0
 

the fix for the GO HOME button
i found it! (it took me days to do it but i'm so proud of myself for finding it)
the setting is in the following file:
/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py

(you need to edit it with sudo nano on a terminal)

on the line 821 (in my case)
there is a section called

"# offsets frame"

and about 17 lines below there is a setting that you have to change to ge the button to go where you want, it's the following:

"ACTION.CALL_MDI_WAIT("G53 G0 Z0") " <--- there it is! that Z0 you have to change to the Z value you want.

after that, save the file, restart your linuxcnc and the button will go to that position.

i hope it helps you.
have a nice day