qtdragonhd; on startup, DRO is showing the icon for G59.3 rather than G54.

When I launch my qtdragon instance, the DRO panel is showing the icon for G59.3. The only way to clear that and see G54 is to select an item in the WCS dropdown that is not G54.  Once the G54 button appears, it works as expected.

My config:

github.com/KennethThompson/printnc_qtdra...config/tree/rapidatc

Any advise?  I can't seem to find any way of forcing G54 to load on start..

You can force startup modes with something like this in the ini section [RS274NGC]

RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9

If you run qtdragon with the -v switch and post the terminal output, we might get a clue why it's G59.3