Does anyone know where these two texts were modified?

More
2 years 9 months ago #291003 by onceloved
Does anyone know where these two texts were modified? was created by onceloved
Does anyone know where these two texts should be modified? I want to translate them into local languages.

 

Attachment not found

 

Attachment not found

Please Log in to join the conversation.

More
2 years 9 months ago #291055 by Aciera
Replied by Aciera on topic Does anyone know where these two texts were modified?
You can use 'grep' in the linuxcnc source folder like this example to find certain places in code:

This command
Code:
user@Computer:~/linuxcnc-dev$ grep -rnw ./ -e 'Adjust Current Tool Position'
 will give you the location:
Code:
./docs/src/gui/qtdragon.adoc:1142:* Adjust Current Tool Position ./lib/python/qtvcp/widgets/offset_tool_button.py:54:        Button = QAction(QIcon('exit24.png'), 'Adjust Current Tool Position', self)

Please Log in to join the conversation.

More
2 years 9 months ago #291059 by persei8
Replied by persei8 on topic Does anyone know where these two texts were modified?
/usr/lib/python3/dist-packages/qtvcp/widgets/axis_tool_button.py

Please Log in to join the conversation.

More
2 years 9 months ago #291096 by onceloved
Replied by onceloved on topic Does anyone know where these two texts were modified?
Thank you. I want to copy the axis_tool_button.py and offset_tool_button.py files to the local configuration. How can I make the modified files take effect? I don’t want to mess with the system files.

Please Log in to join the conversation.

More
2 years 9 months ago #291097 by onceloved
Replied by onceloved on topic Does anyone know where these two texts were modified?
Thank you. I have found it and am trying to modify it....

Please Log in to join the conversation.

More
2 years 9 months ago #291151 by cmorley
Replied by cmorley on topic Does anyone know where these two texts were modified?
Qtvcp has no built in way to allow users to load local replacement widgets.
In the longer run, we should put effort into internationalization I suppose.

Please Log in to join the conversation.

Time to create page: 0.313 seconds
Powered by Kunena Forum