QtDragon_hd failed to start due to an error in qtdragon_hd_postgui.hal

More
2 years 4 months ago #302557 by CADdy
QtDragon_hd failed to start due to an error in qtdragon_hd_postgui.hal was created by CADdy
Hi all,
I followed the manual when configuring “Auto Raise Z Axis”. However, QtDragon_hd no longer starts and displays an error in the console. What can I do?
 

Attachment not found

 

qtdragon_hd_postgui.hal:

Attachment not found

 

Detail from the manual:

Attachment not found



Peter
 

Please Log in to join the conversation.

More
2 years 4 months ago #302560 by Aciera
Replied by Aciera on topic QtDragon_hd failed to start due to an error in qtdragon_hd_postgui.hal
You have 'qtdragon.eoffset_count' instead of 'qtdragon.eoffset-count'.
Note the underscore _ instead of the required hyphen -

Please Log in to join the conversation.

More
2 years 4 months ago #302565 by CADdy
Replied by CADdy on topic QtDragon_hd failed to start due to an error in qtdragon_hd_postgui.hal
oh sh...t, you are right!
I need new glasses, thanks a lot!

Peter

Please Log in to join the conversation.

Time to create page: 0.082 seconds
Powered by Kunena Forum