Code:
STATUS.connect('progress', lambda w,p,t: self.updateProgress(p,t))
def updateProgress(self, p,text):
if p <0:
self.w.progressBar.setValue(0)
self.w.progressBar.setFormat(_translate("HandlerClass",'PROGRESS'))
else:
self.w.progressBar.setValue(p)
self.w.progressBar.setFormat('{}: {}%'.format(text, p))
def percent_loaded_changed(self, fraction):
if fraction <0:
self.w.progressBar.setValue(0)
self.w.progressBar.setFormat(_translate("HandlerClass",'PROGRESS'))
else:
self.w.progressBar.setValue(fraction)
txt = _translate("HandlerClass","LOADING")
self.w.progressBar.setFormat('{}: {}%'.format(txt, fraction))
def percent_done_changed(self, fraction):
self.w.progressBar.setValue(fraction)
if fraction <0:
self.w.progressBar.setValue(0)
self.w.progressBar.setFormat(_translate("HandlerClass",'PROGRESS'))
else:
txt = _translate("HandlerClass","COMPLETE")
self.w.progressBar.setFormat('{}: {}%'.format(txt, fraction))
In Designer, you must set signals from gcode_viewer and gcodegraphics to call percent_donw_changed and percent_loaded_changed.
