Rotary axis in Qtdragon_hd

11 months 3 weeks ago #338033 by cmorley

Replied by cmorley on topic Rotary axis in Qtdragon_hd

Do you want A to rotate around X?
if you load a tool and jog A is this what you see?
Can you test the simulated config?

Please Log in to join the conversation.

11 months 3 weeks ago #338120 by deltafox24

Replied by deltafox24 on topic Rotary axis in Qtdragon_hd

When I load the tool, I see it rotating in the simulation, but all movement is drawn in only one plane. As I showed earlier

Please Log in to join the conversation.

4 months 4 days ago #347338 by deltafox24

Replied by deltafox24 on topic Rotary axis in Qtdragon_hd

Has this issue been resolved yet? Or has no one looked into it?

Please Log in to join the conversation.

4 months 2 days ago #347367 by cmorley

Replied by cmorley on topic Rotary axis in Qtdragon_hd

I don't think we understand exactly what you are expecting.
Are you talking about have a rotary table as A sitting on top of the mill?

Please Log in to join the conversation.

4 months 2 days ago #347368 by Aciera

Replied by Aciera on topic Rotary axis in Qtdragon_hd

@deltafox24
A gcode example would help us test things.

@cmorley I guess he means a preview of rotray tool paths like this:

Please Log in to join the conversation.

4 months 1 day ago #347398 by deltafox24

Replied by deltafox24 on topic Rotary axis in Qtdragon_hd

That's absolutely right; I'm trying to get it to look like your screenshot, but everything is on the same plane for me,

Please Log in to join the conversation.

4 months 1 day ago #347411 by cmorley

Replied by cmorley on topic Rotary axis in Qtdragon_hd

can you supply a sample program ?

Please Log in to join the conversation.

Time to create page: 0.251 seconds