qtdragon additonal buttons

Yes, the G5x button works when long pressed, thanks.

Well, I thought you could call up a calculator-like window, something like that:

 

This gets most of what you want I think...

Mr. Mass wrote:

Yes, the G5x button works when long pressed, thanks.

Well, I thought you could call up a calculator-like window, something like that:

 

Attachment not found

 

Ahh OK I get it - interesting.

perhaps for now adding this to the stylesheets will suffice:

Almost perfect, thank you!

A couple minor issues:

1 - the calculator call works only for X Y and Z axis, but 4 and 5 axis are not, still drop-down menu

2 - if you enable the virtual keyboard, the “set X origin” window appears instead of the calculator window and the virtual keyboard does not work at all

If possible, make the calculator window appear regardless of whether the keyboard is enabled or not, it is much more convenient.

Try these:

It works, thanks a lot for your help!

Excellent! had to use every trick I know

Quick question: how can I increase jogging linear and angular increment drop-down menu? Is it also in stylesheets like you did for G5x button?

The menu will automatically expand as you add additional values ​​in the machine configuration file.

INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm
ANGULAR_INCREMENTS = 0.1, 1, 5, 10, 15, 30, 45, 90, 180, 360, 3600, 36000