How to open QT ui file in LinuxCNC

cmorley
Offline
Platinum Member

1 year 6 months ago #327110 by cmorley

Replied by cmorley on topic How to open QT ui file in LinuxCNC

Excellent!
Cool colors too by the way!

Please Log in to join the conversation.

tommylight
Online
Administrator

1 year 6 months ago #327111 by tommylight

Replied by tommylight on topic How to open QT ui file in LinuxCNC

cmorley wrote:
Excellent!
Cool colors too by the way!

I was just about to say the same thing.

Please Log in to join the conversation.

hakinen2255
Topic Author
Offline
New Member

1 year 5 months ago #327778 by hakinen2255

Replied by hakinen2255 on topic How to open QT ui file in LinuxCNC

Thanks,

I just played around with colors, didnt start to move around things, at the end it will look like the attached image, i hope

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

1 year 5 months ago #327785 by cmorley

Replied by cmorley on topic How to open QT ui file in LinuxCNC

In the latest master version of linuxcnc, the grid will show in perspective (without patch).
Also there is an action tool button to set grid size from the INI entry. See an example of the 'optn' button in any of the qtdragon screens.

Please Log in to join the conversation.

tommylight
Online
Administrator

1 year 5 months ago #327787 by tommylight

Replied by tommylight on topic How to open QT ui file in LinuxCNC

Looks very "space age" with some "cyberpunk" sprinkled into it!

Thank you.

Please Log in to join the conversation.

Time to create page: 0.083 seconds