QtDragon Customize

amir73
Topic Author
Offline
New Member

1 year 5 months ago #329446 by amir73

QtDragon Customize was created by amir73

Hi,
I'm trying to customize the QtDragon screen. I'm copying using qtvcp copy. but when I start I get an error. The screen copy is called inova. With QtAxis everything is fine.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

1 year 5 months ago #329464 by cmorley

Replied by cmorley on topic QtDragon Customize

Either change all the HAL pin names in the Hal files from qtdragon to inova or add -c qtdragon to the load line in the INI.

DISPLAY = qtvcp -d -c qtdragon inova

Please Log in to join the conversation.

amir73
Topic Author
Offline
New Member

1 year 4 months ago #329491 by amir73

Replied by amir73 on topic QtDragon Customize

nice....thanks

Please Log in to join the conversation.

Time to create page: 3.150 seconds