Problem with PROBE tab after running a program

Ok here is the right file for 2.9 version.

As for the other error, set a probe tool number on the probe page - it defaults to black which won't be read correctly.

It is Qtdragon_hd, that's right.
I will try along the day and feedback.

Hi there.

When choosing the PROBE tab with the file in the indicated directory, a pop-up window comes with this error:
"Traceback (most recent call last):
File "/usr/share/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py", line 626, in main_tab_changed
self.adjust_stacked_widgets(index)
File "/home/izan/linuxcnc/configs/QtDragon/qtvcp/screens/qtdragon_hd/qtdragon_hd_handler.py", line 126, in adjust_stacked_widgets
self.w.setCurrentIndex(num)
~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/qtvcp/qt_makegui.py", line 493, in __getitem__
return getattr(self, item)
^^^^^^^^^^^^^^^^^^^
AttributeError: 'VCPWindow' object has no attribute 'dro_button_stack_4' "

(Attached the report)

In the other hand, I´ve set 99 tool number to probe, and after running a program if I go to TOOL tab, select it and push the M61 button to choose, it runs pretty good despite the down yellow line appears with the "cannot switch pages while in AUTO mode"

well strange.
If you are content to just ignore the warning that's fine, otherwise I would need you to find the qtdragon_hd_handler.py file from your system so i could see why it's different.

Hi Chris.

Here you have the file.

Ok try this one:

Hi Chris.

I´ve been using it for a while and this last archive works fine, everything seems to works properly, pretty good.

Thanks a lot.

Glad we finally got it