QTDragon 5-axis trt

Hi all,

It's been quite a while since I was here last..

A year or two ago I installed and configured the 5-axis version of QTDragon (the one that has jog buttons for A and C axes as well), but I can't for the life of me remember where I got it from   

I found Jim's profile but it seems I can't message him from here.

Help appreciated!

well if you are using linuxcnc 2.10 (master branch) 5 axis qtdragon is available.

Otherwise Jim usually looks through Qtvcp forums so will see it and answer.
Or you could message him thru github:

github.com/persei802/QtDragon_hd

I think I'm still on 2.09. I have one of those network cards that was a pain to troubleshoot when I originally set LCNC up (it kept randomly freezing up the Mesa board) and therefore I've resisted upgrading the LCNC version 

hmm well 2.9 Qtdragon does support 5 axis and has sample configs for qtdragon and HD versions.

qtdragon/qtdragon_xy45/qtdragon_xyzac.ini

or

qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini