5 axis steppers testing 3D forms

10 years 4 months ago #75448 by isladelobos

5 axis steppers testing 3D forms was created by isladelobos

Yes i have old hardware embeeded in the box and use tkemc.
This is a test with a G-code bust writed for 5 axis gantry machine.

Please Log in to join the conversation.

10 years 4 months ago #75949 by tommylight

Replied by tommylight on topic 5 axis steppers testing 3D forms

Nice setup you have there.

Please Log in to join the conversation.

Time to create page: 0.075 seconds