Holbrook Minor Lathe converted to CNC

More
10 years 1 month ago #80923 by andypugh
Holbrook Minor Lathe converted to CNC was created by andypugh
The Holbrook Minor is a rather fancy small toolroom lathe from the 1960s
www.lathes.co.uk/holbrook-minor/

I have just-about finished converting one to CNC:

[img


The full build story is on my Blog.
bodgesoc.blogspot.co.uk/search/label/Hol...20Phase%20Conversion

Please Log in to join the conversation.

More
10 years 1 month ago #80929 by skunkworks
Replied by skunkworks on topic Holbrook Minor Lathe converted to CNC
Your work is amazing as always!

sam

Please Log in to join the conversation.

More
10 years 1 month ago #80942 by tommylight
Replied by tommylight on topic Holbrook Minor Lathe converted to CNC
That looks nice !
I need something that size since the small one i have is to weak for some spindle parts i make. Am thinking of building one from scratch.

Please Log in to join the conversation.

More
10 years 1 month ago #80962 by BigJohnT
Replied by BigJohnT on topic Holbrook Minor Lathe converted to CNC
Absolutely beautiful machine!

JT

Please Log in to join the conversation.

More
10 years 1 month ago #80981 by rodw
Replied by rodw on topic Holbrook Minor Lathe converted to CNC
Great work Andy, welcome to the "I used to have a useless 3 in 1 machine" club. After replacing mine with a new 13" Chinese lathe and a separate mill, I am very envious of your Holbrook. What a beautiful machine!

Glad you have added CNC to it so you can continue to support noobs like me!

Please Log in to join the conversation.

Time to create page: 0.083 seconds
Powered by Kunena Forum