Pistol Grips

More
9 years 10 months ago #84320 by jcarpenter
Pistol Grips was created by jcarpenter
A set of grips for a S&W Victory target pistol. Built on a Techno ISEL DaVinci router converted to LinuxCNC with a G540 driver. Pictures show the grips as they came off the router - no finish or sanding. Model built in SolidWorks and gcode generated by DeskProto. Wood is Cocobolo.

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
9 years 10 months ago #84322 by tommylight
Replied by tommylight on topic Pistol Grips
Those look realy nice.
Good job.

Please Log in to join the conversation.

More
9 years 10 months ago #84323 by eFalegname
Replied by eFalegname on topic Pistol Grips
Bravo! bel lavoro!

Please Log in to join the conversation.

More
9 years 10 months ago #84324 by rodw
Replied by rodw on topic Pistol Grips
Makes me sorry that I sold my target pistols. Very nice.

Please Log in to join the conversation.

More
9 years 8 months ago #88624 by MacGalempsy
Replied by MacGalempsy on topic Pistol Grips
Fantastic work. Looks like you got it down to start sales :)

Please Log in to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum