Show your Machines

tommylight wrote:

andypugh wrote: Yes, but I completely failed to find a way to show a google photos image on this forum and gave up.

www.ski.com.au/xf/threads/how-to-post-im...google-photos.77233/

I thought you were my saviour TOmmy but does not work for me...
https://photos.google.com/share/AF1QipOfnMeyd5_-rXXFY2ODlVqoBniTHzxN5K0wWyNrH7VmXAkwBVtC2XI10y2jaxUaww/photo/AF1QipNLKhBTwFVdkY_lUT9mZTd4wDBIUnXkXIPq5JvS?key=eS1uTHBJcVk0ZjFWczdoN3FkSnJaZGlaTGhGaVln

photos.google.com/share/AF1QipOfnMeyd5_-...N3FkSnJaZGlaTGhGaVln

https://lh3.googleusercontent.com/pw/ACtC-3cd5zbuGGZPVOcRL7jbbsDe5Kr3kW46N2IbtCOBcxQg1xBcws6e8lnfPo0XtiwYpeAU-23lVE9jxvqMCuCvHu9unTeWGiUmiR9qDpDFPvjF_1i6_4M6JFEu0P-fHubEMyoIdWZHRg8ek9kY4NlQ-nG8=w1434-h1075-no?authuser=0

picture

The first should have posted the picture here, but it does now work.
The second is a direct link to the picture and opens correctly without albums and stuff

tommylight wrote: https://lh3.googleusercontent.com/pw/ACtC-3cd5zbuGGZPVOcRL7jbbsDe5Kr3kW46N2IbtCOBcxQg1xBcws6e8lnfPo0XtiwYpeAU-23lVE9jxvqMCuCvHu9unTeWGiUmiR9qDpDFPvjF_1i6_4M6JFEu0P-fHubEMyoIdWZHRg8ek9kY4NlQ-nG8=w1434-h1075-no?authuser=0

picture

The first should have posted the picture here, but it does now work.
The second is a direct link to the picture and opens correctly without albums and stuff

Thanks for repeating my experiment and confirming the results. I did wonder if it was a permissions issue but I made a new album and shared it with everyone for my experiment.

linuxcnc=>mesa 5i25=>servo
My home made DIY 6 axis machine with custom kinematic (all 6 axis work simultaneously HEAD> CA TABLE> B .)
RTCP switch by gcode or button from gui

but in this case only work 5axis

Very nice, thank you.

Excellent effort, many thanks

Wow, what software do you use to program the tool paths?
Mark