My mini lathe convertion thread cutting

More
6 years 5 months ago #169053 by Dinuka_Shehan
My mini lathe convertion thread cutting was created by Dinuka_Shehan
special thanks for
Tommylight
BigjohnT
10K
Bbsr_5a
PCW
CliveS
Rodw
And many other who help me

Please Log in to join the conversation.

More
6 years 5 months ago #169056 by bbsr_5a
Replied by bbsr_5a on topic My mini lathe convertion thread cutting
give us some final infos
Controll board Encoder on spindle
spindle driven by belt ?
the installed OS and Linuxcnc version
some extras on Comp
Spindel orientation
..........

Please Log in to join the conversation.

More
6 years 5 months ago #169058 by tommylight
Replied by tommylight on topic My mini lathe convertion thread cutting
Very nice, thank you Dinuka.

Please Log in to join the conversation.

More
6 years 5 months ago #169125 by Dinuka_Shehan
Replied by Dinuka_Shehan on topic My mini lathe convertion thread cutting
Use $17 breakout board because $5 bob won’t the encoder reading
I use 100ppr quadrature rotary incremental encoder.
Reduces rpm 1440 to 188 with aid of range of pulleys and back gear on lathe.no vfd.
Debian linuxcnc Wheezy 2.7
Use nema 23 stepper motor with dia 16mm 5mm ballscrews

Please Log in to join the conversation.

More
6 years 5 months ago #169127 by Dinuka_Shehan
Replied by Dinuka_Shehan on topic My mini lathe convertion thread cutting
A new video

Please Log in to join the conversation.

Time to create page: 0.369 seconds
Powered by Kunena Forum