3D Printer Retrofit

tecno
Offline
Platinum Member

6 years 2 months ago #179848 by tecno

Replied by tecno on topic 3D Printer Retrofit

Simplify3D is a very good tool = I use it also. Awaiting for new revision soon I hope.

Please Log in to join the conversation.

Mike_Eitel
Offline
Platinum Member

6 years 2 months ago #179881 by Mike_Eitel

Replied by Mike_Eitel on topic 3D Printer Retrofit

Yes, i also like it.
They are just very slow with revisions and updates.

Please Log in to join the conversation.

thefabricator03
Topic Author
New Member

6 years 2 months ago #179905 by thefabricator03

Replied by thefabricator03 on topic 3D Printer Retrofit

My brother got me on to Simplified3d, he has printed some pretty good quality stuff using it.

Please Log in to join the conversation.

tommylight
Offline
Administrator

6 years 2 months ago #179948 by tommylight

Replied by tommylight on topic 3D Printer Retrofit

@thefabricator03,
Damn, those are some nice prints !

Please Log in to join the conversation.

thefabricator03
Topic Author
New Member

6 years 2 months ago #180106 by thefabricator03

Replied by thefabricator03 on topic 3D Printer Retrofit

Thanks Tom, my brothers prints are what convinced me to buy my printer. He reckons that when he started using Simplify3d instead of the slicer that came with his printer the quality greatly improved.

Please Log in to join the conversation.

Time to create page: 0.180 seconds