Operators panels

JR1050
Topic Author
Offline
Elite Member

6 years 2 weeks ago #185626 by JR1050

Operators panels was created by JR1050

Built a couple of switch/ button hardware operators panels. One uses usb Pokeys and the other Mesa smart serial.

Attachment not found

Please Log in to join the conversation.

my1987toyota
Offline
Platinum Member

6 years 2 weeks ago #185631 by my1987toyota

Replied by my1987toyota on topic Operators panels

looks nice . I will have to look into integrating a used panel for my lathe build

Please Log in to join the conversation.

tommylight
Away
Administrator

6 years 2 weeks ago #185636 by tommylight

Replied by tommylight on topic Operators panels

Very nice, thank you.

Please Log in to join the conversation.

OT-CNC
Offline
Platinum Member

6 years 2 weeks ago #185638 by OT-CNC

Replied by OT-CNC on topic Operators panels

Nice! Do the button light up when selected? How did you do the graphics?

Please Log in to join the conversation.

JR1050
Topic Author
Offline
Elite Member

6 years 2 weeks ago #185642 by JR1050

Replied by JR1050 on topic Operators panels

Thank you . As of now the buttons don’t light up, I got lazy.... I engraved the graphics. Using Fusion 360 with the Trace routine. Engrave outlines the fonts, trace follows the centerline.

Please Log in to join the conversation.

Time to create page: 0.081 seconds