Setting tools with video on my Lathe

More
5 years 9 months ago #196796 by tecno
Setting tools with video on my Lathe was created by tecno
I am using Gmoccapy and have video in tab.

Attachment not found



Above you can see a 1.6mm TIG welding rod centered in the view, this is for setting up the camera and verify position that is very close to X0. Only as a visual aid as all tools will be zeroed to the cross. Pretty high magnification to do this.

Attachment not found



View from operators side with lathe tool.

Please Log in to join the conversation.

More
5 years 9 months ago #196819 by tommylight
Replied by tommylight on topic Setting tools with video on my Lathe
Looks nice! :)

Please Log in to join the conversation.

Time to create page: 0.310 seconds
Powered by Kunena Forum